Vibe FWD L4-1.8L VIN L (2005)
Fuel Pressure: Testing and Inspection
Fuel System Diagnosis
FUEL SYSTEM DIAGNOSIS
SYSTEM DESCRIPTION
The fuel supply system is a returnless design that has most of the fuel system components located inside of the fuel tank. When the ignition switch is
turned to the START position and the engine is cranking, the circuit opening relay will be energized in order to allow the fuel pump to operate and
pressurize the system. The fuel pump will continue to operate if the powertrain control module (PCM) receives a reference signal when the engine is
started. The fuel pump operates as long as the circuit opening relay is energized by the PCM. When the circuit opening relay is de-energized, the fuel
pump will stop operating. The fuel pump delivers fuel to the fuel rail at high pressure. The fuel pressure regulator, located in the fuel tank, is
responsible for keeping the fuel pressure at 301-347 kPa (44-50 psi).
TEST DESCRIPTION
