Vibe FWD L4-1.8L VIN L (2005)
Cabin Ventilation Grille: Service and Repair
Pressure Relief Valve Replacement
Removal Procedure
1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover /
Fascia/Service and Repair) in Bumpers.
2. Remove the quarter outer panel pressure relief valve (1) from the vehicle by releasing the retaining tabs.
Installation Procedure
1. Install the quarter outer panel pressure relief valve (1). Ensure that the retaining tabs are fully engaged.
2. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover /
Fascia/Service and Repair) in Bumpers.
