Vibe FWD L4-1.8L VIN L (2005)
12. Remove the quarter upper trim panel.
13. Remove the center pillar upper trim panel.
14. Disconnect the left and right roof rail module wiring harness yellow connectors (2) from the roof rail modules (1).
ENABLING ZONE 4
1. Remove the key from the ignition switch.
2. Connect the left and right roof rail module wiring harness yellow connectors (2) to the roof rail modules (1).
3. Install the center pillar upper trim panel.
4. Install the quarter upper trim panel.
5. Install the yellow 2-way connectors to the driver and passenger seat modules (1).
6. Connect the connectors and lock the connectors with the connector lock levers.
