Vibe FWD L4-1.8L VIN L (2005)
Dimmer Switch: Service and Repair
INSTRUMENT PANEL (I/P) DIMMER SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left I/P accessory trim plate.
2. Disconnect the electrical connectors.
3. Using a taped flat bladed tool, gently pry and release the clips around the dimmer switch (3).
INSTALLATION PROCEDURE
1. Install the dimmer switch (3) to the power mirror switch/dimmer switch plate (2).
2. Connect the dimmer/switch electrical connector (2).
3. Install the left I/P accessory trim plate.
