Vibe FWD L4-1.8L VIN L (2005)
Door Switch: Service and Repair
Door Jamb Switch Replacement - Rear
DOOR JAMB SWITCH REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear door jamb switch mounting screw from the door jamb.
2. Disconnect the rear door jamb switch electrical connector.
3. Remove the door jamb switch (2) from the vehicle.
INSTALLATION PROCEDURE
1. Connect the rear door jamb switch electrical connector.
2. Install the rear door jamb switch (2) to the door jamb. Secure the door jamb switch with the screw.
