Vibe FWD L4-1.8L VIN L (2005)
Tail Light Bulb: Service and Repair
TAIL LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Remove the rear compartment trim panel (4).
3. Remove the tail lamp socket (2) from the tail lamp (7).
4. Remove the tail lamp bulb (1) from the lamp socket (2).
INSTALLATION PROCEDURE
1. Install the tail lamp bulb (1) to the lamp socket (2).
2. Install the tail lamp socket (2) to the tail lamp (7).
3. Install the rear compartment trim panel (4) to the vehicle.
4. Close the rear compartment lid.
