Vibe FWD L4-1.8L VIN L (2005)
2. Turn ON the ignition with the engine OFF.
3. Click: Next.
21. The Calibration Update Wizard-Screen S701-25 box will appear (Establishing communication with the vehicle).
1. The Calibration Update Wizard will verify the calibration that is currently in the vehicle.
2. Wait for the process to complete.
22. The Calibration Update Wizard-Screen S701-26 box will appear: Programming Successful!.
1. Verify the calibrations from the: Before Update and After Update columns.
2. Click: Print or Finish to complete the programming event.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
