Vibe FWD L4-1.8L VIN L (2005)
4. Align the extra ridge (1) on the fuel tank lock ring with the mark (2) on the fuel tank.
5. Gently push down on the fuel sender while rotating the lock ring onto the fuel tank.
6. Use the CH-47717 (1) in order to tighten the fuel sender assembly lock ring.
7. After 2 full rotations of the lock ring, watch for the alignment of the lock ring extra ridge (1) with the 2 triangle marks (2) on the fuel tank.
8. Rotate the lock ring until the ridge (1) is positioned within the 16 degree area (3) between the 2 marks (2).