Vibe FWD L4-1.8L VIN L (2005)
Air Injection Vacuum Control Solenoid Valve: Service and Repair
SECONDARY AIR INJECTION (AIR) SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the electrical connector from the secondary air injection (AIR) solenoid valve.
2. Disconnect the 2 vacuum hoses (3) from the AIR solenoid valve (3).
3. Remove the fastener (1) from the AIR solenoid valve (2).
4. Remove the AIR solenoid valve (2) from the intake manifold.
INSTALLATION PROCEDURE
1. Install the AIR solenoid valve (2) to the intake manifold with the one fastener (1).
2. Tighten the AIR solenoid valve fastener (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the fastener to 8.8 N.m (77 lb in).
3. Connect the vacuum hoses (3) to the secondary AIR solenoid valve (2).
4. Connect the electrical connector to the AIR solenoid valve.
