Vibe FWD L4-1.8L VIN L (2005)
Evaporative Emission Control Canister: Service and Repair
EVAPORATIVE EMISSION (EVAP) CANISTER REPLACEMENT
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Unlock the quick connect fitting of the on-board refueling vapor recovery (ORVR) vent line by sliding the lock clasp (1) to unlock position.
3. Disconnect the ORVR vent line (3) from the evaporative emission (EVAP) canister port (2).
4. Disconnect the EVAP canister air inlet line (1) from the vent pipe (2) by pinching both sides of the hose connector.
