Vibe FWD L4-1.8L VIN L (2005)
13. Locate the 4 safety latches (1, 3) and the safety stop (2) on the fuel sender assembly lock ring.
14. While rotating the lock ring during removal, ensure that each safety latch is gently depressed in order to pass without engaging the safety stop.
15. Remove the lock ring (1).
16. Remove the fuel sender assembly (2) from the fuel tank.
IMPORTANT: Do not spill residual fuel or damage the fuel level sensor float while rotating and tilting the sender assembly during removal.
INSTALLATION PROCEDURE
NOTE: Always re-attach the fuel lines and fuel filter with all original type fasteners and hardware.
Do not repair sections of fuel pipes.