Vibe FWD L4-1.8L VIN L (2005)
10. Connect the 4 solenoid electrical connectors.
11. Install the oil filter and the 3 bolts.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
12. Clean and install the 2 magnets on the oil pan.
13. Install a new gasket on the oil pan, then install the oil pan to the transaxle. Secure the oil pan with 18 bolts.
^
Tighten the transaxle oil pan bolts to 6 Nm (53 inch lbs.).
14. Install a new oil pan drain plug.
^
Tighten the transaxle oil pan drain plug to 18 Nm (14 ft. lbs.).
15. Install the left engine splash shield.
16. Lower the vehicle.
17. Connect the negative (-) battery cable.
18. Refill the transaxle as necessary.
