Vibe FWD L4-1.8L VIN L (2005)
3. Install the Pressure Control Solenoid (8) from the valve body, then the Pressure Control Solenoid bracket (7).
^
Tighten the bolt to 7 Nm (58 inch lbs.).
4. Install the TCC solenoid (5), then the Torque Converter Clutch solenoid bolt (4).
^
Tighten the bolt to 11 Nm (97 inch lbs.).
5. Install the 1 - 2 shift solenoid (3) in the valve body.
6. Install the 2 - 3 shift solenoid (1) in the valve body, then install the retaining bolt.
^
Tighten the bolt to 11 Nm (97 inch lbs.).
7. Install the valve body assembly to the transaxle case while connecting the manual valve connecting rod to the manual valve.
8. Secure the valve body assembly with the 17 bolts. Bolt 1 length - 20 mm (0.79 inch), Bolt 2 length - 28 mm (1.10 inch), Bolt 3 length - 50 mm
(1.97 inch).
^
Tighten the 17 valve body bolts to 10 Nm (89 inch lbs.).
9. Install the manual detent spring and bolt.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
