Vibe FWD L4-1.8L VIN L (2005)
4. Disconnect the battery negative cable.
5. Locate the front end sensor - right electrical connector (1).
6. Remove the connector position assurance (CPA) from the front end sensor - right connector.
7. Remove the front end sensor - right electrical connector (1) from the front end sensor - right (2).
8. Open front hood, and locate the front end discriminating sensor - left electrical connector (1).
9. Remove the CPA from the front end sensor - left connector.
10. Remove the front end sensor - left electrical connector (1) from the front end sensor - left (2).
ENABLING ZONE 1