Vibe FWD L4-1.8L VIN L (2005)
Power Mirror Switch: Procedures
Power Accessory Switch Panel Replacement
POWER ACCESSORY SWITCH PANEL REPLACEMENT
REMOVAL PROCEDURE
1. Using a taped flat bladed tool, gently pry up on the front of the side door accessory switch mounting plate (1), and slide forward from the front
side door trim (2).
2. Disconnect the front side door window/lock switch electrical connector (2).
3. Remove the following components from the front side door window/lock switch (3):
-
The 3 screws (1)
-
The front side door accessory switch mounting plate (2)
INSTALLATION PROCEDURE