Vibe FWD L4-1.8L VIN L (2005)
3. Locate and remove the AM2 fuse from the junction block (1), which is located near the base of the steering column.
IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.
4. Disconnect the battery negative cable.
5. Remove the instrument panel (I/P) compartment (2).
6. Release then unlock the I/P module connector (1).
7. Disconnect the I/P module pigtail.
ENABLING ZONE 5
1. Install the yellow 2-way connector to the inflatable restraint I/P module pigtail (1).Connect the connector and lock the connector with the
connector lock lever.
