Vibe FWD L4-1.8L VIN L (2005)
Shifter M/T: Service and Repair
MK5
Gearshift Lever Case Replacement
Gearshift Lever Case Replacement
Removal Procedure
1. Remove the air cleaner assembly.
2. Disconnect the shift cables from the transaxle assembly. Refer to Shift Cable Replacement.
3. Disconnect the backup lamp switch connector from the switch.
4. Remove the backup lamp switch from the transaxle.
5. Remove the 3 bolts and the shift control support bracket from the transaxle.
6. Remove the 2 bolts and the control shift lever from the transaxle
Important: When removing the shift control lever notice that there is a shift control lever bushing and that it must be replaced in its original
position, or incorrect shifting may occur.
7. Remove the shift control lever bushing from the transaxle.