Vibe FWD L4-1.8L VIN L (2005)
8. Remove the clip, then disconnect the cable end from the shift lever assembly.
9. Turn the lock, then disconnect the select cable from the shift lever assembly.
10. Remove the 4 nuts, then the shift lever assembly.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the shift lever assembly, then the 4 nuts.
Tighten the nuts to 12 Nm (9 ft. lbs.).
2. Install the shift cable into the shift lever assembly, then turn the lock clockwise to lock.