Vibe FWD L4-2.4L (2009)
18. Support the rear suspension support crossmember, by using a jack and a block of wood.
19. Remove the evaporative emission canister. Refer to Evaporative Emission Canister Replacement (See: Powertrain Management/Emission Control
Systems/Evaporative Emissions System/Evaporative Emission Control Canister/Service and Repair) or Evaporative Emission Canister
Replacement (See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Evaporative Emission Control
Canister/Service and Repair).
20. Remove the two bolts (1) (2).
21. Remove the two nuts (3) (4).
22. Lower the rear suspension support crossmember.
23. Remove the stabilizer shaft. Refer to Stabilizer Shaft Replacement (All Wheel Drive and GT) (See: Steering and
Suspension/Suspension/Stabilizer Bar/Service and Repair)Stabilizer Shaft Replacement (Except All Wheel Drive and GT) (See: Steering and
Suspension/Suspension/Stabilizer Bar/Service and Repair).