Vibe FWD L4-2.4L (2009)
12. Disconnect the electrical connectors from the A/C D/C module and the communication interface module.
13. Remove the three bolts (1) from the module bracket.
14. Remove the module bracket from the vehicle.
15. Remove the speaker amplifier, if equipped. Refer to Radio Speaker Amplifier Replacement (See: Accessories and Optional Equipment/Radio,
Stereo, and Compact Disc/Amplifier/Service and Repair).
16. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (See: Seats/Seat Cushion/Service and Repair/Rear Seat Cushion
Replacement).
17. Remove the two plastic retainers (1) which secure the front of the floor panel carpet (4).
18. Remove the plastic retainer (5) which secure the middle of the floor panel carpet (4).
19. Remove the two plastic retainers (3) which secure the rear of the floor panel carpet (4).
20. Disengage the floor carpet retainers (2) from each door opening.
21. Remove the floor panel carpet (4) from the vehicle.
Installation Procedure