Vibe FWD L4-2.4L (2009)
of the floor carpet may cause damage.
-
DO NOT leave hair dryer or heat gun inside of the vehicle when it is hot to prevent unintended heat damage on interior parts.
Note
Always wear protective gloves when heating the floor carpet.
Heat the floor carpet area as shown in the illustration for 3 minutes with the tibia pad removed and reshape the carpet.
Note
Be sure to install the reshaped tibia pad.
6. Install the tibia pad by engaging the clip to the tibia pad.
7. Install rubber seat (carpet protector, P/N 89027403).
Note
Place the rubber seat (1) so that the bolt (2) aligns with its vertical center.
1. Clean and degrease the rubber seat application area.
2. Peel the double sided tape cover off the NEW rubber seat.
3. Attach the rubber seat (1) along the floor press line (3).
