Vibe FWD L4-2.4L (2009)
2. Pull back the floor carpet.
1. Remove the clip <A>.
2. Remove the clip <B>.
3. Disengage the 2 fasteners (1).
4. Pull back the floor carpet as shown in the illustration.
Note
It may be difficult to remove the insulator (tibia pad). Pull on the tibia pad while turning the clip.
3. Turn the clip and remove the tibia pad.
Hold Down Area
Tibia Marking Gauge
Cut Line
4. Reshape the tibia pad.
Note
-
Hold down the area shown and draw with a colored pen.