Vibe FWD L4-2.4L (2009)
11. Install the stop lamp switch (1) until the rod hits the cushion.
12. Turn the stop lamp switch 90 degrees clockwise.
13. Adjust the stop lamp clearance. Refer to Stop Lamp Switch Adjustment (See: Lighting and Horns/Brake Light Switch/Adjustments).
14. Connect the stoplamp switch connector (1).
15. Apply lithium soap base glycol grease to the push rod clevis pin (2) and to the clevis pin hole in the pedal.
16. Install the push rod clevis pin in order to retain the push rod clevis (1) to the pedal.
17. Install a NEW clip (3) in order to retain the clevis pin to the pedal.
