Vibe FWD L4-2.4L (2009)
Discard the washer.
12. Use a wrench in order to hold the slide pins (2). Remove the caliper bolts (1).
13. Remove the caliper from the vehicle.
Inspection Procedure
1. Clean and inspect the disc brake caliper components. Repair or replace the components as necessary. Refer to Rear Disc Brake Mounting and
Hardware Inspection (See: Testing and Inspection/Component Tests and General Diagnostics/Rear Disc Brake Mounting and Hardware
Inspection).
2. Clean and inspect the caliper. Repair or replace the components as necessary. Refer to Brake Caliper Inspection (See: Testing and Inspection).
Installation Procedure
1. If the caliper piston is not compressed enough into the bore in order to install the caliper, use a commercially available caliper piston tool (1) in
order to turn the piston in as far as possible.
