Vibe FWD L4-2.4L (2009)
4. Ensure the caliper slide pins (2, 9) are lubricated with lithium soap base glycol grease or Silicone Brake Lubricant, or equivalent. Refer to
Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Fluid Type Specifications). If necessary, refer to Rear Brake Caliper Hardware
Replacement (All Wheel Drive and GT) (See: Rear Brake Caliper Hardware Replacement)Rear Brake Caliper Hardware Replacement (Except
All Wheel Drive and GT) (See: Rear Brake Caliper Hardware Replacement).
5. Install the caliper (11) to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Use a wrench in order to hold the caliper slide pins. Install the caliper bolts (1, 10) and tighten to 35 Nm (26 lb ft).
7. Install a NEW washer to the flexible hose lock hole in the caliper.
8. Install the brake hose to the caliper. Install the hose lock securely into the lock hole in the caliper.
9. Install the brake hose fitting (1) and tighten to 29 Nm (21 lb ft).
