Vibe FWD L4-2.4L (2009)
4. Install the bushing to the lower slide pin.
5. Install the lower slide pin (2) to the caliper bracket.
6. Lubricate the upper slide pin with lithium soap base glycol grease or Silicone Brake Lubricant, or equivalent. Refer to Adhesives, Fluids,
Lubricants, and Sealers (See: Specifications/Fluid Type Specifications).
7. Install the upper slide pin to the caliper bracket.
Note: Ensure each brake pad retainer is in the correct position and direction.
8. Align the match marks and install the upper inside brake pad retainer (1) to the caliper bracket.
9. Align the match marks and install the upper outside brake pad retainer (2).
10. Align the match marks and install the lower outside brake pad retainer (3).
11. Align the match marks and install the lower inside brake pad retainer (4).
