Vibe FWD L4-2.4L (2009)
8. Align the match marks and install the 2 brake pad retainers (1, 2) to the caliper bracket in the correct position and direction.
9. Apply disc brake grease to the pad side of the 2 inner insulators (2, 5).
10. Ensure the disc brake grease covers the area where the inner insulators contact the pads.
11. Install the 2 inner insulators to the 2 brake pads (3, 4).
12. Install the 2 outer insulators (1, 6) to the 2 inner insulators.
13. Install the pads and the insulators to the vehicle. Refer to Rear Disc Brake Pads Replacement (All Wheel Drive and GT) (See: Brake Pad/Service
and Repair/Rear Disc Brake Pads Replacement)Rear Disc Brake Pads Replacement (Except All Wheel Drive and GT) (See: Brake Pad/Service
and Repair/Rear Disc Brake Pads Replacement).
Front Brake Caliper Bracket Replacement
Front Brake Caliper Bracket Replacement
Removal Procedure
1. Remove the disc brake hardware and the slide pin boots. Refer to Front Brake Caliper Hardware Replacement (2.4L Engine) (See: Front Brake
Caliper Hardware Replacement)Front Brake Caliper Hardware Replacement (1.8L Engine) (See: Front Brake Caliper Hardware Replacement).