Vibe FWD L4-2.4L (2009)
2. Turn the piston in order to align the piston groove 90 degrees (a) from the line between the caliper slide pin bores.
Align the piston groove with the protrusion in the brake pad.
3. Ensure the cylinder boot (1) is installed in the groove of the piston. If necessary, refer to Rear Brake Caliper Overhaul (All Wheel Drive and GT)
(See: Overhaul/Rear Brake Caliper Overhaul)Rear Brake Caliper Overhaul (Except All Wheel Drive and GT) (See: Overhaul/Rear Brake Caliper
Overhaul).
