Vibe FWD L4-2.4L (2009)
12. Apply disc brake grease to both sides of the 2 outer insulators (1).
13. Ensure the disc brake grease covers the area where the outer insulators contact the inner insulators.
14. Install the 2 inner insulators (2) to the 2 brake pads.
15. Install the 2 outer insulators to the 2 inner insulators.
16. Install the brake pads and the insulators to the vehicle. Refer to Front Disc Brake Pads Replacement (1.8L Engine) (See: Disc Brake
System/Brake Pad/Service and Repair/Front Disc Brake Pads Replacement)Front Disc Brake Pads Replacement (2.4L Engine) (See: Disc Brake
System/Brake Pad/Service and Repair/Front Disc Brake Pads Replacement).
Rear Brake Caliper Hardware Replacement
Rear Brake Caliper Hardware Replacement (Except All Wheel Drive and GT)
Removal Procedure
1. Remove the rear disc brake pads and the insulators. Refer to Rear Disc Brake Pads Replacement (All Wheel Drive and GT) (See: Disc Brake
System/Brake Pad/Service and Repair/Rear Disc Brake Pads Replacement)Rear Disc Brake Pads Replacement (Except All Wheel Drive and GT)
(See: Disc Brake System/Brake Pad/Service and Repair/Rear Disc Brake Pads Replacement).
