Vibe FWD L4-2.4L (2009)
tighten the fitting to 14 Nm (124 lb in).
6. Install the brake hose to the bracket with the bolt (1) and tighten to 29 Nm (21 lb ft).
7. Remove the cap or the plug from the caliper.
8. Install A NEW brake hose gasket and the brake hose to the caliper:
9. Install the fitting (1) and tighten to 29 Nm (21 lb ft).
Warning: Refer to Brake Fluid Warning (See: Service Precautions/Technician Safety Information/Dangers, Warnings, and Cautions).
Caution: Refer to Filling the Master Cylinder Caution (See: Service Precautions/Technician Safety Information/Filling the Master Cylinder
Caution).
10. Bleed the hydraulic brake system at the bleeder valve closest to the brake hose. Refer to Hydraulic Brake System Bleeding (See: Brake
Bleeding/Service and Repair).
11. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and
Repair).
12. Lower the vehicle.