Vibe FWD L4-2.4L (2009)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Replacement
Removal Procedure
1. Remove the right front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service
and Repair).
2. Remove the right engine undercover. Refer to Engine Splash Shield Replacement - Right Side (See: Body and Frame/Splash Guard/Service and
Repair/Engine Splash Shield Replacement - Right Side).
3. Remove the generator. Refer to Generator Replacement (2.4L) (See: Starting and Charging/Charging System/Alternator/Service and Repair
)Generator Replacement (1.8L) (See: Starting and Charging/Charging System/Alternator/Service and Repair).
4. Remove the coolant surge tank. Refer to Radiator Surge Tank Replacement (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Reservoir/Service and Repair).
5. Remove the washer reservoir. Refer to Windshield Washer Solvent Container Replacement (See: Wiper and Washer Systems/Windshield Washer
Reservoir/Service and Repair).
6. Release the electronic brake control module (EBCM) harness connector lock lever (1).
7. Disconnect the EBCM harness connector (2).