Vibe FWD L4-2.4L (2009)
5. Install the brake line clamp (2) and secure with bolt (1).
Tighten the brake line clamp bolt to 5 Nm (48 lb in).
6. Connect the EBCM electrical connector (2).
7. Secure the EBCM electrical connector lock lever (1).
8. Install the washer reservoir. Refer to Windshield Washer Solvent Container Replacement (See: Wiper and Washer Systems/Windshield Washer
Reservoir/Service and Repair).
9. Install the coolant surge tank. Refer to Radiator Surge Tank Replacement (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Reservoir/Service and Repair).
10. Install the generator. Refer to Generator Replacement (2.4L) (See: Starting and Charging/Charging System/Alternator/Service and Repair
)Generator Replacement (1.8L) (See: Starting and Charging/Charging System/Alternator/Service and Repair).
11. Install the right engine undercover. Refer to Engine Splash Shield Replacement - Right Side (See: Body and Frame/Splash Guard/Service and
Repair/Engine Splash Shield Replacement - Right Side).
12. Install the right front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service
and Repair).
13. Bleed the brake system. Refer to Hydraulic Brake System Bleeding (See: Brake Bleeding/Service and Repair).
