Vibe FWD L4-2.4L (2009)
5. Adjust the park brake and tighten the nuts. Refer to Parking Brake Adjustment (All Wheel Drive and GT) (See: Adjustments)Parking Brake
Adjustment (Except All Wheel Drive and GT) (See: Adjustments).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the console box lower support with the 5 bolts (1, 2, 3, 4, 5) and tighten to 27 Nm (19 lb ft).
7. Install the floor carpet around the console box lower support.
8. Install the console box upper support with the 4 bolts (1, 2, 3, 4) and tighten to 27 Nm (19 lb ft).
9. Install the rear floor console. Refer to Rear Floor Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair).