Vibe FWD L4-2.4L (2009)
14. Install the upper center floor heat shield (1) with the 2 nuts (2, 3). Tighten the nuts to 5.5 Nm (49 lb in).
15. Install the upper front floor heat shield with the 3 nuts (1, 2, 3). Tighten the nuts to 5.5 Nm (49 lb in).
16. Install the center exhaust pipe with the resonator and the catalytic converter. Refer to Catalytic Converter Replacement (2.4L AWD) (See:
Engine, Cooling and Exhaust/Exhaust System/Catalytic Converter/Service and Repair)Catalytic Converter Replacement (2.4L FWD) (See:
Engine, Cooling and Exhaust/Exhaust System/Catalytic Converter/Service and Repair)Catalytic Converter Replacement (1.8L) (See: Engine,
Cooling and Exhaust/Exhaust System/Catalytic Converter/Service and Repair).