Vibe FWD L4-2.4L (2009)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature Sensor Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Engine/Service and Repair/Removal and Replacement/Engine Cover
Replacement)
2. Drain the engine coolant. Refer to Cooling System Draining and Filling (See: Service and Repair)
3. Remove the air cleaner cap with hose.
4. Remove the air cleaner case.
5. Disconnect the engine coolant temperature sensor connector (1).
6. Remove the engine coolant temperature sensor (1) and gasket (2).