Vibe FWD L4-2.4L (2009)
9. Examine the front marks and numbers, and check that the order is as shown in the illustration. Then install the bearing caps into the cylinder head.
10. Apply a light coat of engine oil on the threads and under the heads of the bearing cap bolts.
Intake
11. Using several steps, uniformly install the 10 bearing cap bolts (1) in the sequence shown in the illustration and tighten.
*
The thrust bearing bolts to 30 Nm (22 lb ft)
*
The remaining bearing bolts to 9.0 Nm (80 lb in)
