Vibe FWD L4-2.4L (2009)
16. Install the 2 engine wire harness brackets with the 2 bolts (1, 2) and tighten to 8.4 Nm (74 lb in).
17. Connect the 2 ventilation hoses (1, 2) to the cylinder head cover.
18. Install the spark plug. Refer to Spark Plug Replacement (See: Tune-up and Engine Performance Checks/Spark Plug/Service and Repair).
19. Install the ignition coil assembly. Refer to Ignition Coil Replacement (See: Powertrain Management/Ignition System/Ignition Coil/Service and
Repair).
20. Inspect for oil leak.
21. Inspect the ignition timing.
22. Install the engine cover sub-assembly. Refer to Engine Cover Replacement (See: Service and Repair/Removal and Replacement/Engine Cover
Replacement).
23. Install the engine under right cover.
