Vibe FWD L4-2.4L (2009)
Water Pump: Service and Repair
Coolant Pump Replacement (2.4L)
Special Tools
EN 46104 Water Pump Pulley Holding Tool
Inspection Procedure
1. Remove the radiator surge tank assembly. Refer to Radiator Surge Tank Replacement (See: Cooling System/Coolant Reservoir/Service and
Repair).
2. Remove the generator assembly. Refer to Generator Replacement (2.4L) (See: Starting and Charging/Charging System/Alternator/Service and
Repair)Generator Replacement (1.8L) (See: Starting and Charging/Charging System/Alternator/Service and Repair).
3. Remove the right engine mounting insulator subassembly. Refer to Engine Mount Replacement (See: Drive Belts, Mounts, Brackets and
Accessories/Engine Mount/Service and Repair).
4. Remove water pump pulley. Refer to Coolant Pump Replacement (2.4L) Coolant Pump Replacement (1.8L) (See: ).
5. Inspect water pump assembly.
6. Visually check the drain hole (2) and air hole for coolant leakage.
If leakage is found, replace the water pump assembly.