Vibe FWD L4-2.4L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the water pump and the clamp bracket with the 4 bolts (1, 2, 5, 6) and the 2 nuts (4, 7). Tighten the bolts to 9.0 Nm (80 lb in).
4. Confirm that the wire harness of the crankshaft position sensor is secured to the wire harness clamp bracket (1) through the back of the rib of the
timing chain cover.
5. Install the wire harness clamp.
