Vibe FWD L4-2.4L (2009)
Housing Assembly HVAC: Service and Repair
Air Conditioning and Heater Module Assembly Replacement
Air Conditioning and Heater Module Assembly Replacement
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect the negative battery cable.
2. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging).
3. Drain the engine cooling system. Refer to Cooling System Draining and Filling (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair).
Note: Cap the open fittings in order to prevent dirt and moisture from entering the refrigeration system.
4. Remove the bolt (1) and slide the hook connector.
5. Remove the evaporator inlet and outlet tubes (1) from the evaporator.
6. Remove the O-ring from the tube assembly.