Vibe FWD L4-2.4L (2009)
41. Disengage the drain cooler hose.
42. Remove the bolt (1).
43. Remove the nut (2).
Note: Be sure to support the HVAC module assembly when removing it because failure to do so may cause the bracket of the HVAC module
assembly to break.
Note: When disassembling the HVAC module assembly, eliminate static electricity by touching the vehicle body to prevent the components from
being damaged.
44. Remove the HVAC module assembly from the vehicle.
45. Disengage the two clips (1).
46. Remove the air duct (2) from the HVAC module.
47. Remove the blower case from the HVAC module. Refer to Blower Case Replacement (See: Blower Case Replacement).