Vibe FWD L4-2.4L (2009)
Backup Lamp Switch: Service and Repair
MVE 5 Speed - Manual Transmission
Backup Lamp Switch Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
2. Remove the air cleaner assembly.
3. Remove the clips, and disconnect the transmission shift cable.
4. Disconnect the back-up light switch connector (1) and clamps.
5. Remove the back-up light switch and gasket from the transaxle case.
