Vibe FWD L4-2.4L (2009)
Hose/Line HVAC: Service and Repair
Discharge Hose Replacement
Discharge Hose Replacement (2.4L (LAX))
Removal Procedure
Note: When installing a new hose assembly add 40 ml (1.4 fl oz) of refrigerant oil to the refrigeration system.
1. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Refrigerant Recovery and Recharging).
Note: Cap the open fittings to prevent dirt and moisture from entering the refrigeration system.
2. Remove the bolt (10) and the discharge hose (8) from the compressor.
3. Remove the bolt (12) and the discharge hose assembly (8) from the A/C condenser.
Installation Procedure
1. Install new O-rings lubricated with 525 viscosity mineral oil.