Vibe FWD L4-2.4L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the camshaft position sensor with the bolt (2) and tighten to 9.0 Nm (80 lb in).
3. Connect the camshaft position sensor connector (1).
4. Install the air cleaner cap with hose.
5. Inspect for engine oil leak.
6. Install engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).