Vibe FWD L4-2.4L (2009)
Engine Control Module: Service and Repair
Powertrain Control Module Replacement
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect cable from battery negative terminal. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)
2. Remove the engine cover sub-assembly. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Cover Replacement)
3. Remove the air cleaner cap sub-assembly with hose.
4. Remove the air cleaner case.
5. Separate the wire harness clamp (1).