Vibe FWD L4-2.4L (2009)
Note:
*
This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.81 in) and a J-39194-C - wrench with 30 mm
(1.18 in)
*
This torque value is effective when a J-39194-C - wrench is parallel to the torque wrench.
6. Using the J-39194-C - wrench (1) , install the heated oxygen sensor and tighten.
*
Without the J-39194-C - wrench to 44 Nm (32 lb ft)
*
With the J-39194-C - wrench to 40 Nm (30 lb ft)
7. Connect the heated oxygen sensor connector (1).
8. Inspect for exhaust leaks.