Vibe FWD L4-2.4L (2009)
12. Install the transmission control cable assembly to the control shaft lever with the nut (1) and tighten to 12 Nm (106 lb in).
13. Install the transmission control cable assembly to the bracket with a new clip.
14. Install the battery tray. Refer to Battery Tray Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair).
15. Install the battery. Refer to Battery Replacement (See: Starting and Charging/Battery/Service and Repair).
16. Connect the cable to the negative battery terminal. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
17. Inspect the shift lever position.
18. Adjust the shift lever position.
19. Inspect the park/neutral position switch assembly.
