Vibe FWD L4-2.4L (2009)
1. Coat a new O-ring with ATF WS and install it to the speed sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution)
2. Install the speed sensor with the bolt and tighten to 9 Nm (80 lb in).
3. Connect the speed sensor connector (1).
4. Coat a new O-ring with ATF WS and install it to the speed sensor.
5. Install the speed sensor with the bolt (2) and tighten to 9 Nm (80 lb in).
6. Connect the speed sensor connector.
7. Apply ATF WS to a new O-ring, and install it to the transmission oil level indicator tube assembly.
