Vibe FWD L4-2.4L (2009)
Vehicle Speed Sensor: Service and Repair
MVD 5 Speed - Automatic Transmission
Vehicle Speed Sensor Replacement
Removal Procedure
1. Remove the battery. Refer to Battery Replacement (See: Starting and Charging/Battery/Service and Repair).
2. Remove the battery tray. Refer to Battery Tray Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair).
3. Remove the engine cover assembly. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Cover Replacement).
4. Remove the air cleaner assembly.
5. Disconnect the transmission wire connector, park/neutral position switch connector (2) and wire harness clamps.
6. Remove the bolt and transmission oil level indicator tube sub-assembly.
7. Remove the O-ring from the transmission oil level indicator tube sub-assembly.