Vibe FWD L4-2.4L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the pump bolts.
Tighten the bolts to 8 Nm (71 lb in).
3. Connect the vacuum hose to the small port of the EVAP leak pump.
4. Connect the EVAP filter line to the inlet port (4) of the vacuum leak pump (2).
5. Install the EVAP canister to the vehicle. Refer to Evaporative Emission Canister Replacement (See: Evaporative Emission Control
Canister/Service and Repair).